COMPULSORY VALVE OPERATION CHECK MODE
Engine (Diagnostics)
14. Compulsory Valve Operation Check Mode
S088528
5) Connect Subaru Select Monitor to data link
connector.
(1) Connect Subaru Select Monitor to data link connector (A) located in the lower portion of the instrument panel (on the driver's side).
A: OPERATION
S088528A16
1) Prepare Subaru Select Monitor kit. <Ref. to EN(DOHC TURBO)-8, PREPARATION TOOL, General Description.>
for_01_24-78.jpg
for_01_24-79.jpg
(2) Connect diagnosis cable to data link connector.
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor and OBD-II general scan tool.
6) Turn ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
2)  Connect diagnosis cable to Subaru Select Monitor.
3)   Insert cartridge into Subaru Select Monitor. <Ref. to EN(DOHC TURBO)-8, PREPARATION TOOL, General Description.>
for_01_24-80.jpg
for_01_24-81.jpg
7)  On the
display screen, select the {2. Each System Check} and press the [YES] key.
8)  On the ^System Selection Menu> display screen, select the {Engine Control System} and press the [YES] key.
9)   Press the [YES] key after displayed the information of engine type.
10)    On the ^Engine Diagnosis^ display screen, select the {System Operation Check Mode} and press the [YES] key.
11)  On the ^System Operation Check Mode> display screen, select the {Actuator ON/OFF Operation} and press the [YES] key.
12)  Select the desired compulsory actuator on the ^Actuator ON/OFF Operation^ display screen and press the [YES] key.
13)   Pressing the [NO] key completes the compulsory operation check mode. The display will then return to the ^Actuator ON/OFF Operation^ screen.
4) Connect test mode connector (A) at the lower portion of instrument panel (on the driver's side), to the side of the center console box.
for_01_24-82.jpg
EN(DOHC TURBO)-48
COMPULSORY VALVE OPERATION CHECK MODE
Engine (Diagnostics)
A list of the support data is shown in the following table.
Contents
Display
Compulsory fuel pump relay operation check
Fuel Pump Relay
Compulsory radiator fan relay operation check
Radiator Fan Relay
Compulsory air conditioning relay operation check
A/C Compressor Relay
Compulsory purge control solenoid valve operation check
CPC Solenoid Valve
NOTE:
The following parts will be displayed but not functional because they are not installed on the vehicle.
Display
EGR Solenoid Valve
ASV Solenoid Valve
PCV Solenoid Valve
Vent Control Solenoid Valve
FICD Solenoid
Pressure Switching Sol. 1
Pressure Switching Sol. 2
AAI Solenoid Valve
Fuel Tank Sensor Control Valve
For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
EN(DOHC TURBO)-49