JOINT PIPE
Exhaust
6) Remove lower exhaust manifold cover (RH).
S182771
4. Joint Pipe
A: REMOVAL
S182771A18
for_01_23-34.jpg
1) Disconnect battery ground cable.
for_01_23-35.jpg
7) Remove nuts. Which hold front exhaust mani­fold to joint pipe.
for_01_23-36.jpg
2) Remove solenoid valve cover.
for_01_23-37.jpg
8)   Remove center exhaust pipe. <Ref. to EX(DOHCTURBO)-9, REMOVAL, Center Exhaust Pipe.>
9)   Remove turbocharger. <Ref. to IN(DOHC TURBO)-12, REMOVAL, Turbocharger.>
10)  Take off joint pipe in the upward direction.
3) Disconnect from exhaust temperature sensor connector.
for_01_23-38.jpg
B: INSTALLATION
S182771A11
Install in the reverse order of removal.
Tightening torque:
35 Nm (3.6 kgf-m, 26.0 ft-lb)
for_01_23-39.jpg
4)   Remove front oxygen (A/F) sensor. <Ref. to FU(DOHC TURBO)-42, REMOVAL, Front Oxygen (A/F) Sensor. >
5)   Remove under cover.
EX(DOHC TURBO)-13