THROTTLE BODY
Fuel Injection (Fuel Systems)
5) Disconnect engine coolant hoses from throttle body.
S185010
2. Throttle Body
A: REMOVAL S185010A18
1) Disconnect battery ground cable.
for_01_22-10.jpg
for_01_22-11.jpg
6) Remove bolts which secure throttle body to intake manifold.
B: INSTALLATION S185010A11
Install in the reverse order of removal.
NOTE:
Always use new gaskets.
Tightening torque:
22 Nm (2.2 kgf-m, 15.9 ft-lb)
2)   Remove intercooler. <Ref. to IN(DOHC TURBO)-10, REMOVAL, Intercooler.>
3)   Disconnect connector from throttle position sensor (A) and idle air control solenoid valve (B) and pressure sensor (C).
for_01_22-12.jpg
for_01_22-13.jpg
4) Disconnect accelerator cable.
for_01_22-14.jpg
FU(DOHC TURBO)-14