PRESSURE SENSOR
Fuel Injection (Fuel Systems)
10. Pressure Sensor
S185765
A: REMOVAL S185765A18
1) Disconnect battery ground cable.
for_01_22-117.jpg
2)   Remove idle air control solenoid valve. <Ref. to FU(SOHC)-38, REMOVAL, Idle Air Control Solenoid Valve.>
3)   Disconnect connectors from pressure sensor.
for_01_22-118.jpg
4) Remove pressure sensor from throttle body.
B: INSTALLATION
S185765A11
Install in the reverse order of removal.
NOTE:
Replace gaskets for idle air control solenoid valve
with new ones.
Tightening torque: Pressure sensor
1.6 Nm (0.16 kgf-m, 1.2 ft-lb)
Idler air control solenoid valve
2.8 Nm (0.29 kgf-m, 2.1 ft-lb)
FU(DOHC TURBO)-35