PURGE CONTROL SOLENOID VALVE
Emission Control (Aux. Emission Control Devices)
4. Purge Control Solenoid
B: INSTALLATION
S160035A11
S160035
Install in the reverse order of removal.
Tightening torque:
16 Nm (1.6 kgf-m, 11.6 ft-lb)
Valve
A: REMOVAL
S160035A18
1) Disconnect battery ground cable.
for_01_21-256.jpg
for_01_21-257.jpg
2) Remove bolt which installs purge control solenoid valve onto intake manifold.
CAUTION:
Carefully connect the evaporation hoses.
for_01_21-258.jpg
for_01_21-259.jpg
3)  Take out purge control solenoid valve through the bottom of the intake manifold.
4)   Disconnect connector and hoses from purge control solenoid valve.
(A)    To fuel pipe
(B)    To intake manifold
S160035A10
C: INSPECTION
for_01_21-260.jpg
Make sure hoses are not cracked or loose.
EC(SOHCw/oOBD)-7