THROTTLE BODY
Fuel Injection (Fuel Systems)
6) Disconnect connector from throttle position sensor.
S165010
2. Throttle Body
A: REMOVAL S165010A18
1) Disconnect battery ground cable.
7) Disconnect engine coolant hoses from throttle body.
2) Remove air cleaner case. <Ref. to IN(SOHC)-7, REMOVAL, Air Cleaner Case.>
3) Disconnect accelerator cable (A).
4) Disconnect cruise control cable (B). (With cruise control model)
8) Remove bolts which install throttle body to intake manifold.
5) Disconnect connectors from idle air control solenoid valve (A) and intake manifold pressure sensor (B).
B: INSTALLATION
S165010A11
Install in the reverse order of removal.
NOTE:
Always use a new gasket.
Tightening torque: Throttle body;
22 Nm (2.2 kgf-m, 15.9 ft-lb) Air cleaner case;
6.4 Nm (0.65 kgf-m, 4.7 ft-lb)
FU(SOHCw/oOBD)-11