IDLE AIR CONTROL SOLENOID VALVE
Fuel Injection (Fuel Systems)
10. Idle Air Control Solenoid Valve S165056
A: REMOVAL S165056A18
1) Disconnect battery ground cable.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new gasket.
Tightening torque:
1.6 Nm (0.16 kgf-m, 1.2 ft-lb)
2) Disconnect connector from idle air control solenoid valve.
3) Remove idle air control solenoid valve from throttle body.
FU(SOHCw/oOBD)-31