READ DIAGNOSTIC TROUBLE CODE
Engine (Diagnostics)
7. Read Diagnostic Trouble Code A: OPERATION
S068508
1.  WITH SUBARU SELECT MONITOR
1)  On the
display screen, select the {Each System Check} and press the [YES] key.
2)  On the ^System Selection Menu> display screen, select the {Engine Control System} and press the [YES] key.
3)   Press the [YES] key after displayed the information of engine type.
4)  On the ^Engine Diagnosis^ display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
5)  On the ^Diagnostic Code(s) Display^ display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.
NOTE:
   For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
   For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC). <Ref. to EN(SOHCw/oOBD)-65 LIST, LIST of Diagnostic Trouble Code (DTC).>
2.  WITHOUT SUBARU SELECT MONITOR
No.
Step
Check
Yes
No
1
CHECK STATUS OF CHECK ENGINE MALFUNCTION INDICATOR LAMP (MIL).
1) Turn ignition switch to OFF. 2) Connect read memory connector. <Ref. to EN(SOHCw/oOBD)-10 LOCATION, Electrical Components Location.> 3) Turn ignition switch to ON.
Does the MIL come on?
Go to step 2.
Check the following and repair if necessary. NOTE: Open or short circuit in engine control module power supply or ground line Open or short circuit in CHECK ENGINE malfunction indicator lamp
2
CHECK DIAGNOSTIC TROUBLE CODE (DTC).
Does the MIL indicate diag-Recorddiagn nostic trouble code (DTC)?
Record diagnostic trouble code (DTC). Then turn ignition switch to OFF, disconnect read memory connecnector.
Complete read diagnostic trouble code. Turn ignition switch to OFF and disconnect read memory connector.
EN(SOHCw/oOBD)-27
READ DIAGNOSTIC TROUBLE CODE
Engine (Diagnostics)
The CHECK ENGINE malfunction indicator lamp (MIL) flashes the code corresponding to the faulty parts. The long segment (1.3 seconds ON) indicates a "ten", and the short segment (0.2 seconds ON) signifies "one". And middle segment (0.5 seconds ON) means OK code.
NOTE:
For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC).
<Ref. to EN(SOHCw/oOBD)-65 LIST, LIST of Diagnostic Trouble Code (DTC).>
for_01_21-356.jpg
EN(SOHCw/oOBD)-28