READ DIAGNOSTIC TROUBLE CODE
|
|||||||
|
|||||||
Engine (Diagnostics)
|
|||||||
|
|||||||
11. Read Diagnostic Trouble
|
3. OBD-II GENERAL SCAN TOOL
|
S058508A1603
|
|||||
|
|||||||
|
S058508
|
|
Refers to data denoting emission-related power-train diagnostic trouble codes. For details concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC). <Ref. to EN(SOHC)-80, List of Diagnostic Trouble Code (DTC).>
NOTE:
Refer to OBD-II general scan tool manufacturer's instruction manual to access emission-related powertrain diagnostic trouble codes (MODE $03).
|
||||
Code
|
|||||||
|
|||||||
A: OPERATION
|
S058508A16
|
||||||
1. SUBARU SELECT MONITOR (NORMAL
M O D E ) S058508A1601
1) On the <§Main Menu> display screen, select the {Each System Check} and press the [YES] key.
2) On the ^System Selection Menu> display screen, select the {Engine Control System} and press the [YES] key.
3) Press the [YES] key after displayed the inforÂmation of engine type.
4) On the ^Engine Diagnosis^ display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
5) On the ^Diagnostic Code(s) Display^ display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.
NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
- For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC). <Ref. to EN(SOHC)-80, List of Diagnostic Trouble Code (DTC).>
2. SUBARU SELECT MONITOR (OBD
M OD E ) J S058508A1602
1) On the <§Main Menu> display screen, select the {2. Each System Check} and press the [YES] key.
2) On the ^System Selection Menu> display screen, select the {Engine Control System} and press the [YES] key.
3) Press the [YES] key after displayed the inforÂmation of engine type.
4) On the ^Engine Diagnosis^ display screen, select the {OBD System} and press the [YES] key.
5) On the <§OBD Menu> display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
6) Make sure that a diagnostic trouble code (DTC) is shown on the display screen.
NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
- For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code (DTC). <Ref. to EN(SOHC)-80, List of Diagnostic Trouble Code (DTC).>
|
|||||||
|
|||||||
EN(SOHC)-41
|
|||||||
|
|||||||
|