RADIATOR MAIN FAN AND FAN MOTOR
|
||||||
|
||||||
Cooling
|
||||||
|
||||||
9. Radiator Main Fan and Fan
Motor S176059
|
9) Remove reservoir tank.
|
|||||
|
|
|||||
A: REMOVAL
|
S176059A18
|
|||||
|
||||||
1) Disconnect battery ground cable.
|
||||||
|
||||||
10) Lift-up radiator main fan motor assembly.
11) While lifting up radiator main fan motor assembly, detach oil cooler hose attached to a clip under the radiator main fan shroud. (Oil cooler equipped vehicles only)
|
||||||
|
||||||
2) 3) 4)
|
Lift-up the vehicle.
Remove under cover.
Disconnect connector of main fan motor.
|
|
||||
5) Remove bolts which install radiator onto radiaÂtor cover. (Turbo model)
|
||||||
|
|
|||||
12) Remove radiator main fan motor assembly.
B: INSTALLATION S17
Install in the reverse order of removal.
NOTE:
When the main fan motor assembly cannot be installed as is, loosen the sub fan motor assembly securing bolts to install it.
Tightening torque:
4.9 Nm (0.50 kgf-m, 3.6 ft-lb)
|
||||||
6) Lower the vehicle.
7) Remove V-belt cover.
|
||||||
|
||||||
|
|
|||||
8) Disconnect over flow hose.
|
||||||
|
||||||
CO-32
|
||||||
|
||||||
|
|||||
RADIATOR MAIN FAN AND FAN MOTOR
|
|||||
|
|||||
Cooling
|
|||||
|
|||||
Tightening torque:
4.9 Nm (0.50 kgf-m, 3.6 ft-lb)
|
3) Remove bolts which install fan motor onto shroud.
|
||||
|
|||||
|
|
||||
|
|||||
C: DISASSEMBLY
|
|
||||
S176059 A06
|
D: ASSEMBLY
|
S176059A02
|
|||
|
|||||
1) Remove clip which holds motor connector onto shroud.
|
Assemble in the reverse order of disassembly.
Tightening torque:
4.4 Nm (0.45 kgf-m, 3.3 ft-lb)
|
||||
|
|||||
|
|||||
2) Remove nut which holds fan itself onto fan motor and shroud assembly.
|
|||||
Tightening torque:
3.4 Nm (0.35 kgf-m, 2.5 ft-lb)
|
|||||
|
|||||
|
|||||
|
|||||
CO-33
|
|||||
|
|||||
|