MUFFLER
Exhaust
5. Muffler
152066
3) Remove front rubber cushion, and detach muf­fler assembly.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to mating area of rubber cushion in advance.
SUBARU CRC (Part No. 004301003)
A: REMOVAL
S152066A18
1) Separate muffler from rear exhaust pipe.
CAUTION:
Be careful, exhaust pipe is hot.
for_01_14-24.jpg
for_01_14-25.jpg
2) Remove left and right rubber cushions.
CAUTION:
Be careful not to drop the muffler during
removal.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to mating area of rubber cushions in
advance.
SUBARU CRC (Part No. 004301003)
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Replace gasket with a new one.
Tightening torque:
48 Nm (4.9 kgf-m, 35.4 ft-lb)
for_01_14-26.jpg
for_01_14-27.jpg
C: INSPECTION
S152066A10
1)   Make sure there are no exhaust leaks from con­nections and welds.
2)   Make sure there are no holes or rusting.
3)   Make sure the cushion rubber is not worn or cracked.
EX(SOHC)-11
MUFFLER
Exhaust
MEMO:
EX(SOHC)-12