REAR EXHAUST PIPE
Exhaust
4. Rear Exhaust Pipe
S152068
B: INSTALLATION
S152068A11
A: REMOVAL
S152068A18
CAUTION:
Replace gaskets with new ones.
1) Install rear exhaust pipe bracket to rubber cush­ion.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to mating area of rubber cushion in advance.
SUBARU CRC (Part No. 004301003)
1) Separate rear exhaust pipe from center exhaust pipe.
CAUTION:
Be careful, exhaust pipe is hot.
for_01_14-18.jpg
for_01_14-19.jpg
2) Separate rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down rear exhaust pipe.
2) Install rear exhaust pipe to muffler.
Tightening torque:
48 Nm (4.9 kgf-m, 35.4 ft-lb)
for_01_14-20.jpg
for_01_14-21.jpg
3) Remove rear exhaust pipe bracket from rubber cushion.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to pipe bracket in advance.
SUBARU CRC (Part No. 004301003)
3) Install rear exhaust pipe to center exhaust pipe.
Tightening torque:
18 Nm (1.8 kgf-m, 13.0 ft-lb)
for_01_14-22.jpg
for_01_14-23.jpg
EX(SOHC)-9
REAR EXHAUST PIPE
Exhaust
C: INSPECTION
S152068A10
1)   Make sure there are no exhaust leaks from con­nections and welds.
2)   Make sure there are no holes or rusting.
3)   Make sure the cushion rubber is not worn or cracked.
EX(SOHC)-10