CAMSHAFT SPROCKET
|
|||||||
|
|||||||
Mechanical
|
|||||||
|
|||||||
16. Camshaft Sprocket
|
S183097
|
B: INSTALLATION
|
S183097A11
|
||||
|
|||||||
A: REMOVAL
|
S183097A18
|
1) Install camshaft sprocket No. 1. and No. 2. To lock camshaft, use ST. ST 499207100 CAMSHAFT SPROCKET WRENCH
Tightening torque:
98 Nm (10 kgf-m, 72.4 ft-lb)
CAUTION:
Do not confuse left and right side camshaft sprockets during installation. The camshaft sprocket No. 2 is identified by a projection used to monitor camshaft position sensor.
|
|||||
|
|||||||
1) Remove V-belt. <Ref. to ME(DOHC TURBO)-44, REMOVAL, V-belt.>
2) Remove crankshaft pulley. <Ref. to ME(DOHC TURBO)-46, REMOVAL, Crankshaft Pulley.>
3) Remove belt cover. <Ref. to ME(DOHC TURBO)-47, REMOVAL, Belt Cover.>
4) Remove timing belt assembly. <Ref. to ME(DOHC TURBO)-48, REMOVAL, Timing Belt Assembly.>
5) Remove camshaft position sensor. <Ref. to FU(DOHC TURBO)-31, REMOVAL, Camshaft Position Sensor. >
6) Remove camshaft sprockets. To lock camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH
|
|||||||
|
|||||||
|
|||||||
2) Install camshaft position sensor. <Ref. to FU(DOHC TURBO)-31, INSTALLATION, Camshaft Position Sensor. >
3) Install timing belt assembly. <Ref. to ME(DOHC TURBO)-49, INSTALLATION, Timing Belt Assembly. >
4) Install belt cover. <Ref. to ME(DOHC TURBO)-47, INSTALLATION, Belt Cover.>
5) Install crankshaft pulley. <Ref. to ME(DOHC TURBO)-46, INSTALLATION, Crankshaft Pulley.>
6) Install V-belt. <Ref. to ME(DOHC TURBO)-44, INSTALLATION, V-belt.>
|
|||||||
|
|||||||
C: INSPECTION
|
S183097A10
|
||||||
|
|||||||
1) Check sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between sprocket and key.
3) Check crankshaft sprocket notch for sensor for damage and contamination of foreign matter.
|
|||||||
|
|||||||
ME(DOHC TURBO)-56
|
|||||||
|
|||||||
|