TURBOCHARGER
Intake (Induction)
6. Turbocharger
S184762
7) Loosen clamp which secures turbocharger to air inlet duct.
A: REMOVAL
S184762A18
for_01_22-292.jpg
1)  Set the vehicle on the lift.
2)   Disconnect battery ground cable.
for_01_22-293.jpg
8)   Remove bolt which secures bracket of oil pipe to turbocharger.
9)   Remove oil pipe from turbocharger.
3)   Remove center exhaust pipe. <Ref. to EX(DOHC TURBO)-9, REMOVAL, Center Exhaust Pipe.>
4)   Lower the vehicle.
5)  Separate turbocharger joint pipe from turbo­charger.
for_01_22-294.jpg
for_01_22-295.jpg
10) Remove turbocharger bracket.
for_01_22-296.jpg
6) Disconnect engine coolant hose which is con­nected to coolant filler tank.
for_01_22-297.jpg
11) Disconnect oil outlet hose from pipe.
for_01_22-298.jpg
12) Take out turbocharger from engine compart­ment.
IN(DOHC TURBO)-12
TURBOCHARGER
Intake (Induction)
4) Install joint pipe to turbocharger.
CAUTION:
Replace gasket with a new one.
Tightening torque:
30 Nm (3.1 kgf-m, 22.4 ft-lb)
B: INSTALLATION
S184762A11
1) Connect oil outlet hose to outlet pipe.
for_01_22-299.jpg
for_01_22-300.jpg
2) Install turbocharger to air intake duct.
for_01_22-301.jpg
5) Install turbocharger bracket.
for_01_22-302.jpg
3) Install oil pipe to turbocharger.
for_01_22-303.jpg
6) Connect engine coolant hose which is con­nected to coolant filler tank.
for_01_22-304.jpg
7)   Lift-up the vehicle.
8)   Install center exhaust pipe. <Ref. to EX(DOHC TURBO)-10, INSTALLATION, Center Exhaust Pipe.>
IN(DOHC TURBO)-13