AIR CLEANER
Intake (Induction)
7) Remove air cleaner lower case.
2. Air Cleaner
S184087
A: REMOVALS184087A18
1) Disconnect connector battery ground cable.
for_01_22-274.jpg
for_01_22-275.jpg
B: INSTALLATION
S184087A11
Install in the reverse order of removal.
Tightening torque:
33 Nm (3.4 kgf-m, 25 ft-lb)
2) Disconnect connector from mass air flow sen­sor.
for_01_22-276.jpg
for_01_22-277.jpg
3)   Loosen clamp (A) which connects air intake boot to intake duct.
4)   Remove the two clips (B) from air cleaner upper cover.
CAUTION:
Before installing air cleaner upper cover, align
holes with protruding portions of air cleaner
lower case, then secure upper cover to lower
case.
for_01_22-278.jpg
for_01_22-279.jpg
5)   Remove air cleaner upper cover.
6)   Remove air cleaner element.
C: INSPECTION
S184087A10
Replace if excessively damaged or dirty.
IN(DOHC TURBO)-7