FUEL SUB LEVEL SENSOR
Fuel Injection (Fuel Systems)
21. Fuel Sub Level Sensor
S165023
6) Remove bolts which install fuel sub meter unit on fuel tank.
A: REMOVAL
S165023A18
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Disconnect battery ground cable.
7) Remove fuel sub meter unit.
2) Remove the floor box located just behind the rear seats.
3) Remove service hole cover.
B: INSTALLATION
S165023A11
Install in the reverse order of removal.
Tightening torque:
T: 4.4 Nm (0.45 kgf-m, 3.3 ft-lb)
4) Disconnect connector from fuel sub meter.
5) Disconnect fuel jet pump hose.
FU(SOHCw/oOBD)-53