ENGINE CONTROL MODULE
Fuel Injection (Fuel Systems)
13. Engine Control Module
A: REMOVAL S165050A18
1) Disconnect battery ground cable.
S165049
5) Take off ECM from engine compartment.
B: INSTALLATION
S165049A11
Install in the reverse order of removal.
Tightening torque:
23 Nm (2.3 kgf-m, 16.6 ft-lb)
2) Remove air intake duct.
<Ref. to IN(SOHC)-8, REMOVAL, Air Intake Duct.>
3) Disconnect the two connectors from ECM.
4) Remove bolts which install ECM on right side cylinder head.
FU(SOHCw/oOBD)-38