DATA LINK CONNECTOR
Engine (Diagnostics)
8. Data Link Connector
S058505
A: NOTE
S058505A15
1)  This connector is used both for OBD-II general scan tools and the Subaru Select Monitor.
2)  Terminal No. 4 to No. 6 of the data link connector is used for the Subaru Select Monitor signal.
CAUTION:
Do not connect any scan tools other than the OBD-II general scan tools and the Subaru Select
Monitor, because the circuit for the Subaru Select Monitor may be damaged.
for_01_20-59.jpg
Terminal No.
Contents
Terminal No.
Contents
1
Power supply
9
Blank
2
Blank
10
К line of ISO 9141 CARB
3
Blank
11
Blank
4
Subaru Select Monitor signal (ECM to Subaru Select Monitor)*
12
Ground
5
Subaru Select Monitor signal (Subaru Select Monitor to ECM)*
13
Ground
6
Line end check signal 1
14
Blank
7
Blank
15
Blank
8
Blank
16
Blank
*: Circuit only for Subaru Select Monitor
EN(SOHC)-31