|
ACCELERATOR CONTROL CABLE
Speed Control Systems
|
|||||||
|
|
|||||||
|
|
S177759
|
|
|||||
|
3. Accelerator Control Cable
|
|||||||
|
|
|||||||
|
A: REMOVAL
|
S177759A18
|
||||||
|
|
|||||||
|
|
|||||||
|
1) Remove accelerator pedal. <Ref. to SP-5, REMOVAL, Accelerator Pedal.>
2) Separate accelerator cable and accelerator pedal.
|
|||||||
|
|
|||||||
|
|
|||||||
|
B: INSTALLATION
|
S177759A11
|
||||||
|
|
|||||||
|
1) Install in the reverse order of removal.
CAUTION:
- If cable clamp is damaged, replace it with a new one.
- Never fail to cover outer cable end with boot.
- Be careful not to kink accelerator cable.
- Do not apply grease to the throttle cable on the engine side.
2) Adjustment after pedal installation <Ref. to SP-7, INSTALLATION, Accelerator Pedal.>
|
|||||||
|
|
|||||||
|
C: INSPECTION
|
S177759A10
|
||||||
|
|
|||||||
|
1) Make sure the inner cable is not twisted or frayed.
2) Make sure the outer cable is not cracked.
|
|||||||
|
|
|||||||
|
SP-12
|
|||||||
|
|
|||||||