GENERAL DESCRIPTION
Speed Control Systems
1. General Description
S177001
A: SPECIFICATION
S177001A22
Accelerator pedal
Free play
At pedal pad
1 - 4 mm (0.04 - 0.16 in)
Stroke
At pedal pad
50 - 55 mm (1.97 - 2.17 in)
B: COMPONENT
S177001A05
1. LHD MODEL S177001A0501
for_01_17-2.jpg
(1)    Accelerator bracket
(2)    Stopper
(3)    Bushing
(4)    Clip
(5)    Accelerator spring
(6)    Accelerator pedal spring
(7)    Accelerator pedal lever
(8)    Spring pin
(9)    Accelerator pedal
(10)  Accelerator stopper
(11)  Accelerator plate
(12)  Clip
(13) Kick-down switch (AT model)
Tightening torque: N-m (kgf-m, ft-lb) T: 18 (1.8, 13.0)
SP-2
GENERAL DESCRIPTION
Speed Control Systems
2. RHD MODEL
S177001A0502
for_01_17-3.jpg
(1)
Accelerator pedal
(9) Clip
(2)
Accelerator pedal spring
(10) Stop light switch
(3)
Spring pin
(11) Accelerator spring
(4)
Accelerator pedal pad
(12) Brake pedal spring
(5)
Stopper
(13) Brake spacer
(6)
Bushing
(14) Brake pedal
(7)
Kick-down switch
(15) Spacer
(8)
Pedal bracket
(16) Clevis pin
(17)  Brake pedal pad
(18)  Snap pin
Tightening torque: N-m (kgf-m, ft-lb) T1: 8 (0.8, 5.8) T2: 18 (1.8, 13.0) T3: 29 (3.0, 21.7)
SP-3
GENERAL DESCRIPTION
Speed Control Systems
C: CAUTION
S177001A03
-  Wear work clothing, including a cap, protective goggles, and protective shoes during operation.
-   Remove contamination, including dirt and corrosion, before removal, installation or disas­sembly.
-   Keep the disassembled parts in order and pro­tect them from dust and dirt.
-   Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replace­ment.
-   Be careful not to burn your hands, because each part in the vehicle is hot after running.
-   Be sure to tighten fasteners including bolts and nuts to the specified torque.
-   Place shop jacks or safety stands at the speci­fied points.
-   Before disconnecting electrical connectors of sensors or units, be sure to disconnect negative terminal from battery.
SP-4