OIL PRESSURE SWITCH
Lubrication
6. Oil Pressure Switch
S178069
B: INSTALLATION
S178069A11
A: REMOVAL
S178069A18
1) Apply fluid packing to oil pressure switch threads.
Fluid packing:
THREE BOND 1215 or equivalent
1) Remove generator from bracket. <Ref. to SC-12, REMOVAL, Generator.>
2) Disconnect terminal from oil pressure switch.
3) Remove oil pressure switch.
2) Install oil pressure switch onto engine block.
Tightening torque:
25 Nm (2.5 kgf-m, 18.1 ft-lb)
3) Connect terminal of oil pressure switch.
4) Install generator on bracket. <Ref. to SC-13, INSTALLATION, Generator.>
C: INSPECTION
S178069A10
Make sure oil does not leak or seep from where the oil pressure switch is installed.
LU-21