OIL PRESSURE SYSTEM
Lubrication
2. Oil Pressure System A: SCHEMATIC S178076A21
1. NON-TURBO MODELS178076A2101
S178076
for_01_16-7.jpg
S2M2141
LU-7
OIL PRESSURE SYSTEM
Lubrication
2. TURBO MODEL
S178076A2102
for_01_16-8.jpg
S2M2142
LU-8
OIL PRESSURE SYSTEM
Lubrication
B: INSPECTION
S178076A10
No.
Step
Check
Yes
No
1
CHECK COMBINATION METER.
1) Turn ignition switch to ON. (engine OFF) 2) Check other warning lights.
Does the warning lights go on?
Go to step 2.
Repair or replace the combination meter. <Ref. to IDI-7, INSPECTION, Combination Meter System, .>
2
CHECK HARNESS CONNECTOR BETWEEN COMBINATION METER AND OIL PRESSURE SWITCH.
1) Turn ignition switch to OFF. 2) Disconnect connector from the oil pressure switch. 3) Turn ignition switch to ON. 4) Measure the voltage of harness between the combination meter connector and chassis ground. Connector & terminal (E11) No. 1 - Chassis ground:
Is the voltage more than 10 V?
Replace oil pres­sure switch.
Go to step 3.
3
CHECK COMBINATION METER.
1) Turn ignition switch to OFF. 2) Remove the combination meter. 3) Measure the resistance of the combination meter. Terminal No. A2 - No. B14:
Is the resistance less than 10 Q?
Replace the har­ness connector between combina­tion meter and oil pressure switch.
Repair or replace the combination meter and the oil pressure switch warning light bulb.
LU-9