4. Ignition Timing
S153086
A: INSPECTION
S153086A10
CAUTION:
After warming-up, engine becomes very hot. Be careful not to burn yourself during measurement.
1) Warm-up the engine.
2) To check the ignition timing, connect a timing light to #1 cylinder spark plug cord, and illuminate the timing mark with the timing light.
3) Start the engine at idle speed and check the ignition timing.
Ignition timing [BTDC/rpm]: With OBD Model;
10°±10°/700 rpm Without OBD Model;
MT: 10°±10°/650 rpm
AT: 10°±10°/675 rpm
If the timing is not correct, check the ignition control system.
Refer to Engine Control System. <Ref. to EN(SOHC)-2, Basic Diagnostic Procedure.> or <Ref. to EN(SOHCw/oOBD)-2, Basic Diagnostic Procedure.>