5. Purge Control Solenoid Valve
S150035
A: REMOVAL
S150035A18
1) Disconnect battery ground cable.
2) Remove bolt which installs purge control solenoid valve onto intake manifold.
3) Take out purge control solenoid valve through the bottom of the intake manifold.
4) Disconnect connector and hoses from purge control solenoid valve.
B: INSTALLATION
S150035A11
Install in the reverse order of removal.
Tightening torque:
16 Nm (1.6 kgf-m, 11.6 ft-lb)
CAUTION:
Carefully connect the evaporation hoses.
S150035A10
C: INSPECTION
Make sure hoses are not cracked or loose.