2. Throttle Body
S155010
A: REMOVAL S155010A
1) Disconnect battery ground cable.
2) Remove air cleaner case.
3) Disconnect accelerator cable (A).
4) Disconnect cruise control cable (B). (With cruise control model)
5) Disconnect connectors from idle air control solenoid valve, throttle position sensor.
6) Disconnect air by-pass hose from throttle body.
(A) Throttle position sensor
(B) Idle air control solenoid valve
(C) Air by-pass hose
7) Disconnect engine coolant hoses from throttle body.
8) Remove bolts which install throttle body to intake manifold.
B: INSTALLATION
S155010A11
Install in the reverse order of removal.
NOTE:
Always use a new gasket.
Tightening torque: Throttle body;
22 Nm (2.2 kgf-m, 15.9 ft-lb) Air cleaner case;
6.4 Nm (0.65 kgf-m, 4.7 ft-lb)