|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Injection (Fuel Systems)
|
|
|
|
|
|
|
|
13. Fuel Injector A: REMOVALS155051A18
|
|
(4) Disconnect connector from power steering pump switch.
|
|
|
|
|
|
|
|
|
|
|
|
|
1) Release fuel pressure.
<Ref. to FU(SOHC)-52, RELEASING OF FUEL PRESSURE, OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
|
|
|
|
|
|
|
|
(5) Place power steering pump and tank on the right side wheel apron.
|
|
|
|
|
|
|
|
4) Remove resonator chamber. <Ref. to IN(SOHC)-9, REMOVAL, Resonator Chamber.>
5) Remove power steering pump and tank from brackets.
(1) Remove front side V-belt. <Ref. to ME(SOHC)-42, REMOVAL, V-belt.>
(2) Remove bolts which hold power steering pipe bracket onto intake manifold.
|
|
|
|
6) Remove spark plug cords from spark plugs (#1 and #3 cylinders).
7) Disconnect connector from fuel injector.
|
|
|
|
|
|
|
|
|
|
|
|
(3) Remove bolts which install power steering pump to bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Injection (Fuel Systems)
|
|
|
|
|
|
|
|
8) Remove bolt which holds injector pipe to intake manifold.
|
|
|
|
|
|
1) Release fuel pressure. <Ref. to FU(SOHC)-52, RELEASING OF FUEL PRESSURE, OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
|
|
|
|
|
|
|
|
|
|
|
|
4) Remove two bolts which install washer tank on body.
|
|
|
|
|
|
|
|
9) Remove fuel injector from intake manifold. (1) Remove fuel injector securing clip.
|
|
|
|
|
|
|
|
5) Disconnect connector from front window washer motor.
6) Disconnect connector from rear gate glass washer motor.
|
|
|
|
|
|
|
|
(2) Remove fuel injector while lifting up fuel injector pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Injection (Fuel Systems)
|
|
|
|
|
|
|
|
7) Disconnect rear window glass washer hose from washer motor, then plug connection with a suitable cap.
8) Move washer tank, and secure it away from working area.
|
12) Remove bolt which holds fuel pipe on the left side intake manifold.
|
|
|
|
|
|
|
|
|
|
|
|
13) Remove fuel injector from intake manifold. (1) Remove fuel injector securing clip.
|
|
|
|
|
|
|
|
9) Remove spark plug cords from spark plugs (#2 and #4 cylinders).
10) Disconnect connector from fuel injector.
|
|
|
|
|
|
|
|
(2) Remove fuel injector while lifting up fuel injector pipe.
|
|
|
|
|
|
|
|
11) Remove bolt which holds injector pipe to intake manifold.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Injection (Fuel Systems)
|
|
|
|
|
|
|
|
|
2. LH SIDE S155051A1102
Install in the reverse order of removal.
NOTE:
Replace O-rings with new ones.
|
|
|
|
|
|
|
|
|
1. RH SIDE S155051A1101
Install in the reverse order of removal.
NOTE:
Replace O-rings with new ones.
|
|
|
|
|
|
|
|
|
|
|
|
|
(A) O-ring
(B) Fuel injector
Tightening torque:
4.9 Nm (0.50 kgf-m, 3.6 ft-lb)
|
|
|
|
(A) O-ring
(B) Fuel injector
Tightening torque:
4.9 Nm (0.50 kgf-m, 3.6 ft-lb)
|
|
|
|
|
|
|
|
|
|
|
|
Tightening torque:
4.9 Nm (0.50 kgf-m, 3.6 ft-lb)
|
|
|
|
Tightening torque:
19 Nm (1.9 kgf-m, 13.7 ft-lb)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel Injection (Fuel Systems)
|
|
|
|
|
|
|
|
Tightening torque:
19 Nm (1.9 kgf-m, 13.7 ft-lb)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
